1. Forum
  3. Main Forum
  5. Welcome Mat
  7. Welcome from the UK
× Welcome to the Kunena forum!

Tell us and our members who you are, what you like and why you became a member of this site.
We welcome all new members and hope to see you around a lot!

Welcome from the UK

  • StephanT
  • StephanT's Avatar Topic Author
  • Offline
  • New Member
  • New Member
More
4 years 6 months ago #252 by StephanT
Welcome from the UK was created by StephanT
hi,

been playing with reversing some CAN-bus stuff for motorcycles - been looking for a good (but cost effective) tool... Super impressed with what I see from SavvyCAN and look forward to using it...

I mainly have a MAC, although there is an old WIN10 netbook somewhere that could be used...

Any interfaces that anyone would recommend for MAC (or Win)? - I saw the EVTVDue and CANDue hardware, but would need to order it from the US... I saw the link to Teensy 3.x and found something like this in the UK:
skpang.co.uk/catalog/teensy-canbus-break...eensy-32-p-1507.html
I saw a projects on GIThub...

Would that (a) work? and (b) what would the steps be? (many years ago I used to be an E&E but many years of management have taken their toll... (aiming to sharpen that blade again, but at present `I would not rate my coding skills)

thanks,
Steph

Please Log in or Create an account to join the conversation.

More
4 years 6 months ago #254 by collink
Replied by collink on topic Welcome from the UK
Well, there's a MacOS version of SavvyCAN so you should be OK there.

The SKPang board might work. I did make a version of the firmware for Teensy: github.com/collin80/TeensyRET

But, it might require some modification for the SKPang board, I don't know.

For best compatibility the EVTV stuff is the way to go. Otherwise many other boards could work but might require a couple of modifications to the source code. It's possible that some pins are different.

Please Log in or Create an account to join the conversation.

  • StephanT
  • StephanT's Avatar Topic Author
  • Offline
  • New Member
  • New Member
More
4 years 6 months ago #257 by StephanT
Replied by StephanT on topic Welcome from the UK
I agree on the EVTV stuff.. shame about the shipping cost though..

I'm based in the UK.. and when I wanted to check out two options, either UPS or USPS... and the cheapest option for either was:
UPS: $224.33
USPS: $87.95
Which is just insane...

I had just ordered a 8devices usb2can and UPS shipping was $16....

best
Stephan

Please Log in or Create an account to join the conversation.

  • StephanT
  • StephanT's Avatar Topic Author
  • Offline
  • New Member
  • New Member
More
4 years 6 months ago #258 by StephanT
Replied by StephanT on topic Welcome from the UK
Hmmm.. just thinking about it... Do you need a UK/European distrib? Let's talk over email if you're interested

Please Log in or Create an account to join the conversation.

More
4 years 4 months ago #268 by collink
Replied by collink on topic Welcome from the UK
You'd have to contact EVTV directly for that. Ask for Jack. I'm not involved in the business decisions.

Please Log in or Create an account to join the conversation.

  1. Forum
  3. Main Forum
  5. Welcome Mat
  7. Welcome from the UK
Time to create page: 0.037 seconds
Powered by Kunena Forum