× Welcome to the Kunena forum!

Tell us and our members who you are, what you like and why you became a member of this site.
We welcome all new members and hope to see you around a lot!

Correct drivers needed for M2RET Board to use with SavvyCAN

Start
Prev
1
Next
End

reckert
Topic Author
Offline
New Member

5 years 2 weeks ago #220 by reckert

Correct drivers needed for M2RET Board to use with SavvyCAN was created by reckert

I installed the M2RET on my macchina m2, and after restarting the M2, Windows recognizes there is a USB Device, but doesn't detect it as a serial device - which device driver do I need to use to make it work? I am trying to reverse engineer the HUD on my 2006 Pontiac Grand Prix to allow an Android Head Unit to send notifications to the HUD.

Please Log in or Create an account to join the conversation.

collink
Offline
Administrator

5 years 2 weeks ago #221 by collink

Replied by collink on topic Correct drivers needed for M2RET Board to use with SavvyCAN

Windows is rather irritating as it has no driver for the built-in USB on the SAM3X processor while OSX and LINUX do. Anyway, the easiest approach is to go to www.arduino.cc and install the IDE from the website:

www.arduino.cc/download_handler.php?f=/a...no-1.8.9-windows.exe

That will install the drivers for you.

Please Log in or Create an account to join the conversation.

reckert
Topic Author
Offline
New Member

5 years 2 weeks ago #222 by reckert

Replied by reckert on topic Correct drivers needed for M2RET Board to use with SavvyCAN

Somehow Windows was fixated on the driver for that one USB port, when I moved the M2 to a different hub, it recognized as a serial port.

Please Log in or Create an account to join the conversation.

Start
Prev
1
Next
End

Time to create page: 0.040 seconds

Correct drivers needed for M2RET Board to use with SavvyCAN

Login Form